|
|
Post by gw43125 on Dec 21, 2017 14:35:30 GMT
I've been meaning to ask this for a while, but I remember reading a while back that the Vic ATO couldn't be programmed to skip a stop, instead you'd have to stop and restart. However, a couple of months ago we were told to non-stop Euston for whatever reason and we went straight through. At what point was this changed, and how many stops can you skip in a row?
Thanks.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 21, 2017 18:29:59 GMT
When the DTG-R signalling was introduced a few years ago it changed
You could put a skip on all the stations of course except the terminal ones
Distance TO Go -Radio
|
|
|
|
Post by gw43125 on Dec 21, 2017 19:22:36 GMT
When the DTG-R signalling was introduced a few years ago it changed You could put a skip on all the stations of course except the terminal ones Distance TO Go -Radio Was this in connection to the replacement of '67 stock? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 21, 2017 19:30:08 GMT
Yes
The old signalling was not able to switch out a station as it only had braking spots I think it was 7 in the platform area from memory.
Newer signalling systems can just ignore a station completely but usually still slow down
|
|
towerman
My status is now now widower
Posts: 2,970
|
Post by towerman on Dec 22, 2017 15:24:28 GMT
You could switch out a station under the original ATO system(the trains would run through on 270 code)but could only be done for a day's traffic not individual trains.
|
|
|
|
Post by gw43125 on Dec 22, 2017 21:53:52 GMT
Makes sense, thank you all.
|
|
